Option C guide
ScoutTalentAI™: record it yourself
You don't need a special camera system to get a ScoutTalentAI report. If you already film your games with a phone or a basic camera, you can send us that footage. One thing matters more than the camera you own: how you record decides what we can give you back.A steady, wide, fixed shot gives us far more to work with than expensive footage that chases the ball. Follow the setups below and you'll get the best report your gear can produce.
1. The five golden rules
- Fixed, always. The camera sits on a stand, pole, or tripod for the whole match. Never handheld.
- Halfway line. Set up at midfield, on the sideline, centered on the field.
- Raised high. About 4 to 6 metres (13 to 20 ft) is ideal. Around 3 metres (10 ft) is the minimum. Higher is better: height is what lets us read the whole field.
- Whole field in frame. Everything stays visible, all the time. Never pan to follow the ball. Never zoom during play. It feels wrong the first time: trust it. A player who leaves the frame is a player we cannot analyze.
- Landscape, full match. Record sideways (landscape), from before kickoff to the final whistle. Start a minute or two early: that warm-up minute helps us sync and check the picture.
2. Setup 1: one phone or camera, fixed wide
One iPhone, Android, or camera at the halfway line, raised as high as your stand allows, framed so the whole field fits.
- Resolution: 4K if your phone has the storage for it, otherwise 1080p (Full HD) is fine.
- Frame rate: 30 fps is fine. 60 fps is OK too, but it uses more storage and battery.
- Lock it down: if your phone allows, lock focus and exposure (on most phones, press and hold on the screen). Turn off digital zoom completely.
- No interruptions:switch on airplane mode or Do Not Disturb, so a call or notification can't stop the recording.
- Power: plug in a power bank for the full match. Video drains a battery fast.
- Storage (rough estimates for 90 minutes): 4K uses about 30 to 65 GB; 1080p uses about 10 to 20 GB. Check your free space before you leave home.
3. Setup 2: two phones, one per half
Two phones on two stands: one covers the left half, one covers the right half, with a small overlap at the halfway line. This is our best do-it-yourself setup, because each half of the field is closer and clearer.
- Use the same settings as Setup 1 on both phones.
- Start both recordings before kickoff.
- Sync them: right after starting, stand where both cameras can see you and give one loud clap, or flash a phone light at both. That clap is how we line the two files up perfectly.
- Leave both running for the whole half. Swap nothing at halftime: just keep recording, or restart both for the second half the same way, with another clap.
4. Setup 3: any consumer camera or camcorder
A camcorder, action camera, or mirrorless camera on a pole or tall tripod works exactly the same way. The golden rules don't change. The one thing to check is the lens width: from your spot at the halfway line, the whole field (Setup 1) or your full half (Setup 2) must fit in the frame without moving the camera. If it doesn't fit, raise the camera higher or move back. Don't solve it by panning.
5. What each setup honestly delivers
We grade every upload when it arrives, and we'll always tell you straight what your footage can support:
- Handheld or ball-following video (including follow-cam footage from other platforms): an events report plus highlight clips(goals, shots, key plays). This footage cannot support truthful per-player distances, speeds, or heatmaps, so we won't pretend it can.
- One fixed wide camera (Setup 1 or 3): events, clips, and team shape: how your team is positioned and moves as a unit. The per-player physical layer (distance covered, speed, heatmaps) is possible only if the whole field stays in frame at usable quality, and we confirm that per upload.
- Two fixed phones covering the full field (Setup 2): our best route to the full report, including the per-player physical layer, still graded per upload, because light, height, and resolution all play a part.
6. What NOT to do
- Don't pan or zoom, even for a penalty or a breakaway.
- Don't record vertical (portrait) video.
- Don't film from ground level, or through or behind fence mesh if you can avoid it.
- Don't stop and restart mid-half.
- Don't edit, trim, or compress the file before uploading.
- Don't use low-storage or space saver recording modes: the lost detail can't be recovered.
7. After the game
- Keep the original file untouched: no trimming, no filters, no re-saving.
- Upload the full match (both files, if you used Setup 2).
- Tell us: the kickoff time, which team is which color, and which setup you used. That small note saves real time and improves accuracy.
8. Practical notes
- Placement and safety:set the stand where it can't be knocked over or trip anyone, and keep it clear of the technical areas and the assistant referee's run.
- Permission:check your school's and league's filming rules before the match, and get permission where it's required.
- Weather: a simple rain cover, clear plastic bag, or hood over the phone keeps rain off the lens. Wipe the lens at halftime on wet days.
Questions before your first upload? Send us a photo of your setup from the sideline. We'll tell you in one look whether the position and height are right.
